The devices only operate in cooling mode.
Environmentally friendly R407c refrigerant in standard products
is used. The system can be created with different refrigerant depending on the water temperature regime or upon request.
As a water cooler, its type may vary depending on the model.
DX, immersion type copper tube coil, shell&tube type evaporator or plate heat exchanger are used.
Axial type high efficiency fan is used.
A high efficiency condenser with copper tubes, aluminum fins or microchanel is used. A safe condenser suitable for operation in hot climate conditions is selected.
In condensers, epoxy coated aluminum lamella, copper lamella, hydrophilic coated lamella etc. can be placed in the working environment or optionally. Different material options are available.
Electricity supply is 380-400 V – 3 phase – 50 Hz, and the electrical panel and internal wiring of the device comply with EN 60204-1 standard.
High device efficiency and low energy consumption are achieved with the microprocessor control system.
In the factory where ISO 9001:2008 Quality Management System is implemented, products are manufactured with CE and Domestic Goods Certificates.
Cooling and protection used as standard in the system
equipment; solenoid valve, expansion valve, dryer filter, sight glass, manometers and low-high pressure controller. Vibration receiver is used except CT AV Series. Liquid trap, oil separator, etc. according to the water temperature regime. additional equipment is used.
Galvanized sheet metal is used in the production of device cabinets and is painted with electrostatic powder paint.
Single compressor models of the CT QU, CT AU and CT NE series do not have capacity control. Dual compressor models have 50% - 100% capacity control.
CT TI series have 25% – 50% – 75% – 100% capacity control.
Standard products have water inlet - outlet, supply and water discharge connections.
Optional equipment or systems; remote monitoring module
Inverter module Fan speed control
